Author Topic: SB π  (Read 4542 times)

Offline John

  • Forum Support / SB Dev
  • Posts: 2622
    • ScriptBasic Open Source Project
Re: SB π
« Reply #225 on: April 30, 2019, 06:53:15 PM »
I may try wrapping this code for the SLED extension module.

https://github.com/hzeller/rpi-rgb-led-matrix/blob/master/include/led-matrix-c.h

Offline John

  • Forum Support / SB Dev
  • Posts: 2622
    • ScriptBasic Open Source Project
Re: SB π
« Reply #226 on: April 30, 2019, 08:16:45 PM »
I installed the RTIMULibCal tool which is pretty cool.


pi@RPi3B:~/rpicalc/RTEllipsoidFit $ RTIMULibCal
RTIMULibCal - using RTIMULib.ini
Settings file RTIMULib.ini loaded
Using fusion algorithm RTQF
Using min/max compass calibration
Ellipsoid compass calibration not in use
Accel calibration not in use
LSM9DS1 init complete

Options are:

  m - calibrate magnetometer with min/max
  e - calibrate magnetometer with ellipsoid (do min/max first)
  a - calibrate accelerometers
  x - exit

Enter option: m

Magnetometer min/max calibration
--------------------------------
Waggle the IMU chip around, ensuring that all six axes
(+x, -x, +y, -y and +z, -z) go through their extrema.
When all extrema have been achieved, enter 's' to save, 'r' to reset
or 'x' to abort and discard the data.

Press any key to start...


Min x: 1000.00  min y: 1000.00  min z: 1000.00
Max x: -1000.00  max y: -1000.00  max z: -1000.00

Offline John

  • Forum Support / SB Dev
  • Posts: 2622
    • ScriptBasic Open Source Project
Re: SB π
« Reply #227 on: May 03, 2019, 05:41:35 PM »
I was able to compile from the latest IUP source and Gtk3 a release for the Raspberry Pi.

RPi IUP Online Dictionary

Offline petelomax

  • BASIC Developer
  • Posts: 8
  • Author of Phix
    • The Phix Programming Language
Re: SB π
« Reply #228 on: May 18, 2019, 01:59:47 PM »
sorry wrong thread
« Last Edit: May 18, 2019, 02:12:31 PM by petelomax »